中山彩钢板厂家冰箱镀锌白灰彩涂板卷单面H型压花pcm彩涂板

相对于普通彩涂板，压花彩涂板不仅具有材料轻量化、抗划伤性强等特点，还具有极高的视觉美观感，能够满足用户更高的要求。此外，该类产品在材料加工时可实现绿色环保，顺应了彩涂产品的发展趋势。

Compared with the ordinary color coating board, the embossed color coating board not only has the characteristics of lightweight material, strong scratch resistance, but also has a very high visual and aesthetic sense, which can meet the higher requirements of users.In addition, this kind of products can realize green environmental protection in the material processing, in line with the development trend of color coating products.

单面压花彩色涂层钢板，基材为钢板，在钢板的正面涂有底漆层，在底漆层上辊涂有环氧树脂油漆层，环氧树脂油漆层的表面压制有各种花纹，在钢板的背面涂有背漆层。利用压花辊在环氧树脂油漆层表面压印形成立体纹路表面，外观十分美丽漂亮，具有避免使用PVC材料，降低油漆使用成本及提升产品外观的功效，满足个性化使用需求。

Single face embossed color coated steel plate, the substrate is steel plate, on the front of the primer layer, roll on the primer layer with epoxy paint layer, the surface of the epoxy paint layer pressed with various patterns, on the back side of the steel plate with back paint layer.Using embossed roller on the surface of epoxy paint layer, the appearance is very beautiful and beautiful, has the effect of avoiding using PVC materials, reducing the use cost of paint and improving the appearance of the product, to meet the needs of personalized use.

另一种单面H型压花PCM彩色涂层钢板，基板上表面喷涂有第一无铬钝化层，且第一无铬钝化层上侧的基板还压设有压H型花纹，所述压H型花纹上侧还喷涂有底漆层，所述底漆层上表面还设置有面漆层，且面漆层的上表面还设置有保护膜，所述基板下表面还喷涂有第二无铬钝化层，且第二无铬钝化层的下端设置有环氧无铬背漆层。单面H型压花PCM彩色涂层钢板是在热镀锌生产线收卷前进行单面H型压花，生产线速快比行业内提升40%生产效率，产量提高，减少二次压扎加工，一次成型。且生产工艺能够保证产品质量，特别是产品性能。

Another single-sided H-shaped embossed PCM color-coated steel plate has a first chrome-free passivation layer on the upper surface and the first H-type pattern and the H-type pattern on the upper surface with a paint layer and the upper surface of the coating layer with a protective film, a second chrome-free passivation layer and the lower end of the second chrome-free passivation layer.Single-sided H-shaped embossed PCM color coated steel plate is single-sided H-shaped embossing before winding in the hot-plated galvanized production line. The production line improves 40% faster than in the industry, improving the production efficiency, reducing the secondary compression processing and primary molding.And the production process can ensure the product quality, especially the product performance.