2022-5-9 09:40| 发布者: steelfu4mo| 查看: 2306| 评论: 0 |原作者: 佛山万庆物资
合理的选材可以在满足使用要求的同时最大限度的降低成本，不合理的选材则会导致成本增加或产品不合格，所以客户应高度重视合理选材的重要性，佛山市万庆物资有限公司提供售前技术服务，为客户的选材提出专业性的意见和建议。
Reasonable material selection can meet the requirements of use at the same time minimize cost, unreasonable material will lead to the cost increase or unqualified products, so the customer should attach great importance to the importance of reasonable material selection, Foshan Wanqing materials co., LTD., provide pre-sale technical services, put forward professional opinions and Suggestions.
白色彩涂板选材关注的指标主要包括：力学性能、基板类型和镀层重量、正面涂层性能和反面涂层性能。
The indicators of white color coating board material selection mainly include: mechanical properties, substrate type and coating weight, front coating performance and reverse coating performance.
新宇彩涂板的产品质量不仅由基材和涂料的基本性能决定，还取决于生产工艺及操作控制技术。操作控制技术对彩涂板产品的物理性能、表面质量影响较大，从生产工艺分析生产控制技术重点应包括清洗处理、化涂处理、涂装（含初涂、精涂）、固化4个环节。
The product quality of Xinyu color coating board is not only determined by the basic performance of the substrate and coating, but also depends on the production process and operation control technology.Operation and control technology has a great impact on the physical performance and surface quality of color coating board products. From the production process analysis, the production control technology should include cleaning treatment, chemical coating treatment, coating (including initial coating, fine coating) and curing.
新宇彩涂板生产采用两涂两烘生产工艺。为了保证彩涂产品涂层质量，需要在涂敷之前对基材表面进行除油、除尘、除锈等前期处理工作，这是保证涂装工艺的第一步，也是保证彩涂板产品质量的基础工作。生产过程中，固化是关键工序，涂料涂敷到钢板上后，需加热使湿涂层中的溶剂得以挥发，同时使有机物在催化剂的作用下发生聚合或交联反应。
Xinyu color coating board production adopts two coating and two drying production process.In order to ensure the coating quality of color coating products, it is necessary to carry out oil removal, dust removal and rust removal on the substrate surface before coating, which is the first step to ensure the coating process, and also the basic work to ensure the quality of color coating board products.In the production process, curing is the key process. After the coating is applied to the steel plate, it is necessary to heat to volatilize the solvent in the wet coating, and polymerize or crosslink the organic matter under the action of the catalyst.