pcm彩涂板出口订单装箱案例_佛山彩钢板厂家钢材采购配送全套服务 ...

2021年1月中佛山市万庆物资有限公司的黎同事接到一份来自国外0.6黑色彩涂卷DX51D的采购订单，出口加拿大温哥华的。客户询价的材料是PVDF高耐候涂层加厚漆膜的彩涂板，正面膜厚25un，背面漆膜25un，基材是DX51D+AZ100镀铝锌基板。在专业同事的共同协助下，开始报价，耐心地服务于客户，专业的技术指导，还考虑到货物的出口装箱方案特殊性，我们用心，诚心，最终争取客户获得订单！ 

In mid January 2021, colleague li of Foshan Wanqing Materials Co., Ltd. received a purchase order for 0.6 black coated dx51d from abroad, which was exported to Vancouver, Canada. The customer enquiry material is PVDF high weather resistant coating thickening paint film color coating plate, the mask is thick 25un, the back paint film 25un, the substrate is DX51D+AZ100 aluminum zinc substrate. With the joint assistance of professional colleagues, we began to quote, patiently serve our customers, provide professional technical guidance, and take into account the particularity of the export packing scheme of the goods. With our heart and sincerity, we finally strive for customers to obtain orders!

按照客户的需求，提供了一份装箱方案，在6月3日进行出货。

According to the customer's needs, a packing scheme is provided for shipment on June 3.

佛山市万庆物资有限公司的同事经历过几次出口装箱，加固工作不断地提升，这次执行出口装箱的加固作业更有经验了。

The colleagues of Foshan Wanqing Materials Co., Ltd. have experienced several export packing, and the reinforcement work has been continuously improved. This time, they have more experience in the reinforcement operation of export packing.

下面给大家分享一下集装箱卷钢的装箱与加固方法

一、集装箱的装载，为防止对集装箱的破坏，必须要考虑铲车，以及货物在集装箱中的移动。 装箱之前，我们必须知道以下4点：

1、钢卷沿集装箱长度方向靠中间纵向放置。

2、钢卷的中轴方向与集装箱长度方向垂直。

3、重量沿集装箱长度方向轴上均匀分布。

4、较重的钢卷要放在集装箱叉齿孔位置。

Now let's share the packing and reinforcement methods of container coil steel

一、 For the loading of containers, forklifts and the movement of goods in containers must be considered in order to prevent damage to containers. Before packing, we must know the following four points:

1. The steel coil is placed longitudinally in the middle along the length of the container.

2. The central axis direction of the steel coil is perpendicular to the length direction of the container.

3. The weight is evenly distributed along the length axis of the container.

4. The heavy steel coil shall be placed at the fork hole of the container.

二、装箱时

1、装载时，如有必要，厚木料要铺在集装箱地板上以均匀分散铲车的重量(针对轮子窄的铲车而言)。铲车进入 集装箱的斜坡设计在坡头处要是平的。这能够保证铲车和货物的重量移动从斜坡到平面时，在金属斜坡上而不是在集装箱地板上；

2、集装箱地板上要钉上一排木轨，钢卷放在木轨上。木轨使得重量能够更有效地分布在集装箱地板上，目标是达到地板所承受的重量分布≤5T每米。

二、 When packing

1. When loading, if necessary, thick wood shall be laid on the container floor to evenly distribute the weight of the forklift (for forklifts with narrow wheels). The slope of forklift entering the container is designed to be flat at the slope head. This can ensure that the weight of forklift and cargo moves from slope to plane on the metal slope rather than on the container floor;

2. A row of wooden rails shall be nailed on the floor of the container, and the steel coil shall be placed on the wooden rail. The wooden rail enables the weight to be more effectively distributed on the container floor, and the goal is to achieve the weight distribution borne by the floor ≤ 5t / m.

三、装箱步骤

步骤一：依照钢卷的数量、单卷毛重确定每卷钢卷合理的配装位置。然后，沿集装箱长度方向等距平行固定三根底条，间距依据钢卷宽度设定，两侧底条的外延之间宽度应略小于钢卷宽度，底条间距在25~30cm左右，以达到均匀分散钢卷的重量，每根底条均匀钉上3组/每组2个(共6个)钉子;

步骤二：根据卷钢的直径和底条的长度使两者中心线保持一致, 由此确定梯形木塞的固定位置,每个梯形木塞钉上2个钉子;

步骤三：用叉车将卷钢放上底条并倚靠住梯形木塞;

步骤四：紧贴住卷钢，在底条另一端固定梯形木塞,请特别注意固定梯形木塞的钉子加固方向

步骤五：用两根钢丝绳对钢卷进行绑扎，进一步防止卷钢在集装箱内的跳动和滚动，绑扎为八字前后拉。

三、 Packing steps

Step 1: determine the reasonable assembly position of each coil according to the number of coils and the gross weight of a single coil. Then, three bottom strips shall be fixed equidistant and parallel along the length direction of the container, and the spacing shall be set according to the width of the steel coil. The width between the extension of the bottom strips on both sides shall be slightly less than the width of the steel coil, and the spacing of the bottom strips shall be about 25 ~ 30cm, so as to evenly disperse the weight of the steel coil. Each bottom strip shall be evenly nailed with 3 groups / 2 nails in each group (6 in total);

Step 2: according to the diameter of the steel coil and the length of the bottom strip, keep the center lines of the two consistent, so as to determine the fixed position of the trapezoidal wooden plug, and each trapezoidal wooden plug is nailed with two nails;

Step 3: put the coil steel on the bottom strip with a forklift and lean against the trapezoidal wooden plug;

Step 4: cling to the coil steel and fix the trapezoidal wooden plug at the other end of the bottom strip. Please pay special attention to the reinforcement direction of the nail fixing the trapezoidal wooden plug

Step 5: bind the steel coil with two steel wire ropes to further prevent the jumping and rolling of the steel coil in the container. The binding is eight shaped and pulled back and forth.

如果不采取任何的紧固措施，由于恶劣的海洋和空气条件 造成的船只倾斜和摇摆，钢卷可能在集装箱内跳上跳下，这种跳动会很容易损坏集装箱甚至造成更严重的后果。我们所采取的加固措施，主要是为了防止在集装箱内钢卷的滚动，倾倒，跳动和滑动这四种比较常见的现象，采用的加固材料主要是木条、木塞、钢丝绳及辅助设备。

If no fastening measures are taken, due to the inclination and swing of the ship caused by poor ocean and air conditions, the steel coil may jump up and down in the container, which will easily damage the container and even cause more serious consequences. The reinforcement measures we take are mainly to prevent the four common phenomena of rolling, dumping, bouncing and sliding of steel coils in the container. The reinforcement materials are mainly wooden strips, wooden plugs, steel wire ropes and auxiliary equipment.